Micropositioning
Categories
Dynamic strain limits of Amplified Piezo Actuators
19 June 2023
It is well known that the Amplified Piezo Actuators (APA) offer large strains in static conditions and at resonance. Because many applications as shakers, anti-vibration and motors would benefit also of large dynamic strain below resonance, the maximum strain of the APA has been theoretically and experimentally investigated in this wide frequency range. The tested actuator is the APA30uXS currently used in the SPA30uXS new inertial micro piezo motor.
Self locking MRF actuators for dampers and latches
6 January 2008
MRF actuators are new electromechanical components using Magneto Rheological Fluids (MRF). When submitted to a high enough magnetic field, MRF switch from a liquid to a near solid body. These new developed MRF actuators were developed in order to reach three aims: to offer a blocking force at rest which can be strongly reduced by applying a current, to provide an electrically-controllable resistive force over a stroke of 30 mm, to perform the control of the force in a very short time, typically in a few milliseconds.
Self-tuning semi-active tuned-mass damper for machine tool chatter suppression
19 June 2023
Tuned mass dampers are simple and efficient devices for suppression of machine tool chatter, which is one of the principal effects limiting productivity in many machining processes. However, their effectiveness depends on a proper tuning of the damper dynamics to the dynamics of the machine. This involves the dynamic characterisation of the machining process, in order to identify the critical resonance frequency, and the possibility of matching the resonance frequency of the damper to frequency. The difficulty of meeting these two requirements has been limiting the use of tuned mass dampers in industrial applications.
Eddy current sensors on Printed Circuit Board for compact mechatronic application
19 June 2023
In a contact of always smaller and smarter mechatronics devices, the needs of more integrated sensors becomes critical. Particularly, small mechanisms using small actuators like piezo actuators require compact sensors, with performances that measure up to the actuators characteristics.
Electrical Tunable Low frequency miniature suspension
19 June 2023
Optical instruments such as interferometers and optical delay lines are sensitive to external vibrations and require a strong isolation of vibrations. Some products for active, semi active or passive isolation exist but are rather large which makes them much more suitable for lab applications than to embedded applications as meet in Space, Aircraft or Military applications in general, or in the space ICE CNES experiment. These requirements have driven the development of a new type of Electrically-Tunable Low-Frequency Miniature Suspension.
Servo piezo tool SPT400MML for fast and precise machining of free forms
19 June 2023
Recent requirements for accuracy and resolution demand higher quality in the machining of precision parts in many industries—such as optics, automotive and aerospace—by free form machining. The required operations are possible by using expensive manufacturing equipment in parallel with several processes such as grinding and polishing. By using a new fast tool servo, the so-called servo piezo tool SPT400MML, driven by a piezoelectric actuator for the precision diamond turning of non-symmetrical surfaces, components can be machined with a fast motion control of the tool (diamond or carbide).