Publications
Categories
Servo piezo tool SPT400MML for fast and precise machining of free forms
19 June 2023
Recent requirements for accuracy and resolution demand higher quality in the machining of precision parts in many industries—such as optics, automotive and aerospace—by free form machining. The required operations are possible by using expensive manufacturing equipment in parallel with several processes such as grinding and polishing. By using a new fast tool servo, the so-called servo piezo tool SPT400MML, driven by a piezoelectric actuator for the precision diamond turning of non-symmetrical surfaces, components can be machined with a fast motion control of the tool (diamond or carbide).
Ski embbeded piezo system
19 June 2023
Since many years, the field of active control of vibrations has been growing up and many new applications using smart actuators have been developing. In 2003, CEDRAT TECHNOLOGIES in collaboration with SKI ROSSIGNOL initiated a project supported by ESA where these concepts (smart material and active control of vibration) were adapted and applied on a ski structure. The project aim was to damp the large modes of vibrations keeping the robustness of the control and the static loads during the ski ride.
Space compliant mobile voice coil actuator
19 June 2023
A moving coil actuator for high precision positioning and compatible with space technology specifications has been designed and successfully tested. General space technology requirements are the use of no degassing material, no lubrication, low mechanic time constant, low electrical power consumption, and thermal energy evacuation through radiating and conducting exchanges (no convection because of operation in vacuum environment). These specifications have been accounted in the design, the realisation and the test of a successful prototype: Thanks to a good design of thermal drains, the actuator presents a high force versus weight ratio.
Progress In Magnetostrictive Sonar Transducers
19 June 2023
Continous interest from the French Navy (DRET and CERDSM) has permitted significant improvements to magnetostrictive transducers in order to produce low-frequency high-power sonar sources. These improvements can be appreciated by looking at three transducers.
Pulsed air high performances valves improve aerodynamic flow over airplane wings
19 June 2023
The objective of the European Cleansky project is to develop new technologies for future aircraft enabling a 20-30% fuel burn reduction and related CO2 emissions and a similar reduction in noise levels compared to current aircraft. One of the ways to reach this goal is to improve the aerodynamic performances of current high lift devices. Active flow control is unanimously seen as the best mean to reach this objective. By suppressing flow separation and/or delaying stall, active flow control will increase wing aerodynamic performances. The partnership between CTEC and ONERA in the framework of the VIPER project has led to the design, manufacturing and test of an innovative pulsed jet actuator based on a CTEC amplified piezo-actuator (APA). Its aim is to provide a pulsed sonic jet up to 500Hz with a mass flow around 34 g/s through a slot 1mm wide and 80mm long. Coupled with CTEC SA75D switching power amplifier this actuator produces the expected sonic jet with an electrical consumption around 40W thanks to energy recovery. The results of the actuator characterisation (mechanical, fluidic) are presented in this paper.
Qualification of Euclid near infrared spectro photometer cryomechanism – An application of CTEC ECS
19 June 2023
Already presented at 2015 ESMATS symposium [1], the CEA-Cryomechanism (CM) is a cryogenic rotating actuator that can operate from room temperature down to cryogenic environments, under vacuum or nitrogen atmosphere. In the framework of the Euclid-NISP space program, after having built two bread board model (BBM) units, CEA has undergone the integration of three qualification model (QM) units, among which one unit is going through a full qualification program (the two remaining units are intended to be qualified at upper system level).
