Publications
Categories
Actuator based on the Thomson effect
1 January 2003
Good limitations of the current in a circuit using an electromechanical breaker suppose a very fast opening of the contacts. Due to the fact that the electrodynamic repulsive forces do not generate enough acceleration, an actuator has to be used to improve the breaker performances. Since a traditional reluctant magnetic device is too slow for the application concerned, a propeller based on the Thomson effect has been chosen. FLUX2D simulations make possible a good understanding of the propellerâs operation and thus the improvement of its design.
Cardiolock: an Active Cardiac Stabilizer
19 June 2023
Off-pump Coronary Artery Bypass Grafting (CABG) is still today a technically difficult procedure. In fact, the mechanical stabilizers used to locally suppress the heart excursion have been demonstrated to exhibit significant residual motion. We therefore propose a novel active stabilizer which is able to compensate for this residual motion. The interaction between the heart and a mechanical stabilizer is first assessed in vivo on an animal model. Then, the principle of active stabilization, based on the high speed vision-based control of a compliant mechanism, is presented. In vivo experimental results are given using a prototype which structure is compatible with a minimally invasive approach.
Smart actuators for aircraft applications
4 January 2003
Smart actuators and intelligent structures receive a considerable interest in the fields of Air & Space, to realise new functions or more efficient functions than passive structures. In these fields, there are needs for actuation means offering high mechanical energy density (product of stroke and force divided by the mass), a low power consumption, a resistance to severe environment (such as vibrations) as well as other case by case needs : High resolution (embedded active optics for cameras and telescopes), fast response (active control of structures shape, active damping of vibration)âŠ
A new Rotating Voice Coil Motor for Meteosat Third Generation satellites
19 June 2023
In the frame of the Meteosat Third Generation project (MTG), the future European Operational Geostationary Meteorological Satellites system, Cedrat Technologies has developed a dedicated actuator for the Scan Assembly mechanism (SCA) made by SENER. Such motors are needed to actuate the SCA on the north/south (N/S) and east/west (E/W) axes. The requirement of precise pointing of the SCA induces very specific characteristics for the motorisation. The motor needed characteristics are: to be free from any cogging, high constant motor [N.m/vW] to have a constant torque over full stroke range, to have a very low hysteresis and to have redundant coils. To meet these stringent requirements, the choice was made to develop a specific Rotating Voice Coil Motor.
LA75B powerful electronic for piezo actuators
19 June 2023
LA75B : A powerful electronic that makes APA sing higher in volume and larger in frequency.
ACTUATOR2008 Moving Iron Controllable Actuators
6 January 2008
To meet the demand of controllable millimeter-stroke actuators, there are two possible starting points. One is to consider improvement of moving coil actuators, the other is to consider improvement of moving iron actuators. Following this approach and using its experience on the different types of magnetic actuators, Cedrat Technologies has developed new specific Moving Iron Controllable Actuators, called MICA. This actuator circumvents previous controllability limitations of standard Moving Iron actuators while keeping their high forces capabilities. Compared with moving coils of the same force, the MICA are twice less in mass while requiring 3 times less electric power. Another significant advantage of the MICA is a much better heat dissipation and reliability as the MICA coil is fixed into the iron stator.
