Embedded power systems
Categories
P-FSM and M-FSM piezoelectric and magnetic fast steering mirrors
5 September 2023
To meet needs in air, space, defence & other embedded or demanding applications CEDRAT TECHNOLOGIES (CTEC) bas developed for more than 20 years Fast Steering Mirrors (FSM). Typical applications are for example Lidar, free space optical communication (FSO) and Laser interferometry. As the specifications met in these applications can vary, CTEC bas designed and patented different actuation technologies:
– FSM based on Amplified Piezo Actuators APA®, as for PHARAO, ATLID, PSYCHE missions, and for future FSO space constellations as well as other large FSM for space & instrumentation as ESO ELT.
– FSM based on Magnetic Actuation, as being developed for FSO and CO-OP optical communication toward Geosat.
– FSM based on Stepping Piezo Actuators, as for IASI-NG for METOP-SG, as well as other piezomotor-based FSM.
The presentation describes the working principle, design and performance of these different actuation concepts.
Real-Time Image Super Resolution System Based on Micro-scanning Technology
5 September 2023
Different from the recent popular super resolution system based on AI technology which needs normally massive training datasets, the micro-scanning super resolution system by integrating the high-precision mechanism and the image processing system can overpass the training datasets limit to enhance the image resolution and quality considerably in real time. Such a real-time image super resolution system named Quick Demo Station (QDS) system is presented. This system is jointly developed by Shanghai IAE, China, in cooperation with Cedrat technologies, France. The system is made of two modules, one imaging module (MicroScan_ VIS_Module ), the other image processing module (a portable image processing workstation). The image processing module performs imaging module’s control, as well as image acquisition, image registration, image superresolution reconstruction, image contrast enhancement. Here the algorithm used to restore the low-resolution (LR) images is the iterative reconstruction method, which could achieve high quality super-resolution (SR) results. The output is a video stream whose frame rate is higher than 25 frames per second. The system is being tested in different applications and show the excellent super-resolution results, including low light level conditions and outdoor variable lighting scenarios. Furthermore, the algorithm in image processing module can be used not only on the workstations, but also in embedded processing system.
Contactless Position sensors for space mechanisms based on eddy current sensing
19 June 2023
For more than 20 years, CTEC has been involved in various space missions, delivering products designed for severe environment conditions (vibrations, shocks, vacuum, humidity, wide thermal range including cryogenic). Eddy current sensor (ECS) technology, using printed circuit board (PCB) for printed coils, provides both a good resolution/accuracy and a good robustness against temperature variations.These sensors are available commercially off the shelf (COTS).
From the Test Benches to the First Prototype of the muFly Micro Helicopter
19 June 2023
The goal of the European project muFly is to build a fully autonomous micro helicopter, which is comparable to a small bird in size and mass. The rigorous size and mass constraints infer various problems related to energy efficiency, flight stability and overall system design. In this research, aerodynamics and flight dynamics are investigated experimentally to gather information for the design of the helicopter’s propulsion group and steering system. Several test benches are designed and built for these investigations
Driving control electronics piezoelectric actuators space applications
19 June 2023
Piezoelectric mechanisms are more and more used in space applications requiring precise positioning functions for scientific payloads or optical functions. Indeed, piezoelectric actuators are generally deemed of being good candidates for driving and control compact mechanisms.
